 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
How to Apply Your Graphics
|
For the best results, vinyl graphics should be applied at a minimum temperature of 10°c on to a smooth, sound and clean surface. It does not matter if there is some moisture but any trace of grease, dust and grit should be eliminated. |
||
 |
 |
 |
|
First place your graphics on to the clean and grease free surface. |
When happy with the position, hinge the graphics securely with a strip of masking tape. |
Cut the graphics into manageable pieces. |
 |
 |
 |
|
Remove the graphics from the backing paper. |
Smooth down with a flat edge, e.g. small ruler. |
Remove the backing paper at an angle of about 180° |
|
Alternatively
you can use a central hinge method - secure the graphic in the
centre as shown in the following photographs:
|
||
 |
 |
 |
|
First,
position your graphics.
|
Use
a strip of tape to secure centrally.
|
Peel
backing off one half.
|
 |
 |
 |
|
Smooth
graphic onto surface.
|
Remove
backing on second half and smooth down.
|
Finally,
remove transfer tape.
|